To fill the carboniser at the refill station, follow these steps:. Important:

To fill the carboniser at the refill station, follow these steps:<ol><li style="font-size: 16px;">Firmly screw the CO2 cylinder into the refill station. This requires more force than with other soda makers. Don&#x2019;t worry about breaking anything; screw it in with full force until the cylinder is fully seated.</li><li style="font-size: 16px;">Press the spark bottle down firmly until you hear the CO2 flowing (a kind of squeaking sound). When you hear the flow noise, continue pressing the bottle down firmly until the noise gradually weakens and then disappears. This takes about 10-15 seconds.</li><li style="font-size: 16px;">If the CO2 does not flow, slightly move the bottle to different sides while pressing down until you find a position where it works.&#xA0;</li><li style="font-size: 16px;">Lift the bottle vertically upwards from the refill station.</li></ol> Important:<ul style="list-style-type: circle;"><li style="font-size: 18px;">The carboniser might already be (almost) fully filled due to our function tests, so you might not need to fill it before the first use.</li><li style="font-size: 18px;">The carboniser should only be (re)filled when it is at room temperature.</li></ul>

How do I correctly fill the carboniser at the refill station?

If you press the bottle down firmly at the refill station for 10-15 seconds, the flow noise will first decrease and then disappear. The carboniser is then full and weighs around 280/290g (without the bottle body). Important: Due to function tests, th

If you press the bottle down firmly at the refill station for 10-15 seconds, the flow noise will first decrease and then disappear. The carboniser is then full and weighs around 280/290g (without the bottle body). Important: Due to function tests, the carboniser may have already arrived well-filled or even full. A full carboniser (without the bottle) weighs approximately 280g.

When is the carboniser fully filled?

Follow these steps to make fresh sparkling water with the spark bottle:. 1. Fill the bottle up to the recommended fill level (where the shoulder of the bottle starts to curve - better a little less than too much) and screw the cap on. 2. Hold the bot

Follow these steps to make fresh sparkling water with the spark bottle:1. Fill the bottle up to the recommended fill level (where the shoulder of the bottle starts to curve - better a little less than too much) and screw the cap on.2. Hold the bottle upright and press the carboniser button firmly so you can hear the CO2 flowing into the bottle. Keep the button pressed until you hear the pressure release, which sounds like a light &quot;blow-off&quot; coming from the bottle lid. It takes 3-10 seconds for the pressure release to activate, depending on how firmly you press the carboniser button.3. Shake the bottle vigorously to bind more carbon dioxide.4. Carefully open the cap. If you want stronger sparkling water, repeat steps 2 and 3.

How do I produce sparkling water with the spark bottle?

When the carboniser gradually empties, you will notice that the carboniser button requires less effort to press. Additionally, the flow noise of the CO2 will become weaker, and it will take longer for the pressure release to activate. An empty carbon

When the carboniser gradually empties, you will notice that the carboniser button requires less effort to press. Additionally, the flow noise of the CO2 will become weaker, and it will take longer for the pressure release to activate.An empty carboniser (without the bottle) weighs approximately 240/250g.

How do I realize that the carboniser gets empty?

To maximize the lifespan of your spark bottle and ensure it remains hygienic and in excellent condition, here are some important care and cleaning tips:. Care of the spark bottle. Care of the refill station. For more detailed instructions and tips, y

To maximize the lifespan of your spark bottle and ensure it remains hygienic and in excellent condition, here are some important care and cleaning tips:Care of the spark bottle<ul><li>Dry regularly and avoid leaving it damp for extended periods:&#xA0;This helps prevent lime scale buildup. If lime scale has formed, carefully remove it with vinegar or lemon juice. </li><li>Do not clean in the dishwasher: The modularity of the bottle allows you to reach all areas easily. Instead, use a soft, damp cloth or a kitchen sponge and mild dish soap.</li><li>Clean the sealing element: The sealing element in the bottle cap can be removed for cleaning. Make sure to reinsert it correctly afterward. <a href="https://www.youtube.com/watch?v=SV3Q7eqS19s">Here is a video on cleaning the sealing element.</a></li><li>Do not submerge the carboniser: The carboniser should not be submerged in water. If the filling valve is damp or wet after cleaning, make sure to dry it before the next use.</li></ul>Care of the refill station<ul><li>Do not submerge in water or clean in the dishwasher: Use a soft, damp cloth and mild dish soap for cleaning. Avoid abrasive or chemical cleaners and sharp tools.</li><li>Completely dry: The refill station must be completely dry before the next use.</li><li>Clean the movable platform: The movable platform can be removed for cleaning.&#xA0;<a href="https://www.youtube.com/watch?v=YH71NtCfFfA">Here is a video on cleaning the movable platform.</a> </li></ul>For more detailed instructions and tips, you can consult our user manual.If you have any questions about cleaning and maintenance or need assistance, our customer support is always available. You can reach us by email at <a data-fr-linked="true" href="mailto:hello@bottleplus.com">hello@bottleplus.com</a>.

Cleaning and maintenance instructions

bottleplus

Initial setup and use

What is bottleplus?

How to use the spark bottle from bottleplus?

Introduction and product overview

My carboniser cannot be filled at the refill station

If I press the carboniser button, no CO2 flows

The sparkling water is not strong enough