How to use the spark bottle from bottleplus?Updated 9 months ago

bottleplus is easy and intuitive to use. Here’s how to make your own sparkling water in just a few steps:

Insert the CO2 cylinder:

• Firmly screw the CO2 cylinder into the refill station. This requires more force than with other soda makers. Don’t worry about breaking anything; screw it in with full force until the cylinder is fully seated.
• You might hear a short hissing sound. If you do, just continue screwing it in quickly.
  
  

Fill the carboniser:

• Place the bottle on the movable platform of the refill station and press it down firmly for 10-15 seconds until the flow noise stops. The carboniser is full when it weighs 280/290g (without the bottle body).
• Note: The carboniser might already be (almost) fully filled due to our function tests, so you might not need to fill it before the first use.
  
  

Add water and CO2:

• Fill the bottle up to the point where the curve start. It’s better to fill a little less than too much.
• Screw the cap tightly onto the bottle until it’s fully seated.
• Press the carboniser button until you hear the pressure release. This takes 5-20 seconds, depending on how firmly you press the button. The pressure release is indicated by a light “blow-off” sound.
  
  

Shake and enjoy:

• Shake the bottle vigorously (like a cocktail shaker!).
• For stronger sparkling water, press the carboniser button again until the pressure release, and then shake the bottle again.
• Open the bottle carefully.
  
  

Now you can enjoy your fresh sparkling water :)